In order to meet the more convenient charging requirements in the car scene, MOMAX has introduced the Q.Mount 2 magnetic wireless charging car bracket set, supporting Samsung 10W and Apple 7.5W wireless charging. The kit mainly consists of two parts: the car bracket and the two-port car charger. Today, we are going to bring you the disassembly of the “magnetic wireless quick charging bracket” of the car bracket.
1, MOMAX Momis Q.Mount 2 magnetic wireless fast charging bracket out of the box
The front of the package indicates the main features of the product, supporting Samsung 10W and Apple 7.5W wireless charging.
The back side is the main technical parameter. Model CM10, input 5V2A, 9V2A, output 5V1A, 9V1A (maximum 10W).
How to use: Connect to the power supply, attach the PU corrugated iron to the phone, and magnetically charge.
Package contents: Q.Mount magnetic wireless quick charging bracket (model CM10), QC3.0 & 2.4A dual USB car charger (model UC7A), adhesive bracket, PU leather iron, Micro USB cable (1m), user's Guide.
Adhesive brackets can be attached to a flat surface for charging in home or office settings.
The charging bracket can be conveniently clamped at the air outlet of the car air conditioner, which is suitable for the vehicle use scene.
The bracket is round in shape.
The side is an aluminum alloy anodizing process, supplemented by high-light chamfering, and the texture is good. A rotating ball head is attached to the bottom of the panel for 360° free viewing angle.
The main specifications are marked on the back. Name: Q.Mount 2 Wireless Car Charger; Model: CM10. Input 5V2A, 9V2A, output 5V1A, 9V1A (maximum 10W).
Power is input using the Micro USB interface.
The product was tested using the ChargerLab POWER-Z KT001 tester. The measured display supports the 9V gear QC input.
2, MOMAX Momis Q.Mount 2 magnetic wireless fast charging bracket dismantling
Remove a ring of rubber on the surface and you can see that a magnet is mounted.
Remove the panel and magnet.
The product uses a single coil design.
Three screws are fixed on the back of the PCB, and the middle position is the LED indicator.
LED lights close-up.
The input small board is connected to the main PCB board by wires.
Plastic parts.
The main components are as shown.
Input interface socket, magnetic missing.
4 NPO capacitors.
Weimeng's voltage regulation.
MA7Y, input current limiting protection chip.
YJ33, Shengbangwei SGM2019 3.3V regulator IC.
The Bayland D9009 wireless charging fully integrated power chip.
The new generation digital demodulation wireless fast charging chip D9605 developed by Bayland is a 48M high-frequency wireless charging dedicated MCU, supporting Qi standard 5V/12V mode, implementing WPC1.2.3 protocol, and compatible with Samsung 10W fast. Charge, Apple (iPhone 8, iPhone 8 Plus, iPhone X) 7.5W fixed frequency fast charge mode. The D9605 is now shipping with the D9009 power-driven 10W fast charging solution. Due to the significant reduction of external components, the official claims that the efficiency is significantly better than the common wireless charging solutions in the market.

Dismantle the family.
3, the charging head network disassembly summary
MOMAX magnetic wireless charging car bracket, in addition to the exquisite appearance, the internal work materials are also very good, the same as the table. The Baylander solution is used to provide wireless fast charging performance. Reliable product quality and performance is an ideal solution for car charging scenarios.
.